Models MP-415, MP-420
Page 5
Reset Time (Default = 10 seconds)
The MP-415 can provide power-on reset with a pre-set power off time. This time can be set to turn the
power off 5 to 45 sec. in 5 sec. increments. Example: to set for 15 sec. enter 9 plus 3
‘
∗
’.
(3x5=15sec.)
Number of Active Ports (Default = 8)
The MP-415 has four controllable outlets. An additional four can be controlled using the K-415A-R1
expansion unit. When all eight outlets are not being used, change this setting can to limit the voice status
response to those that are active. To set the number of active ports, enter ‘1’ plus the number of active
ports (1-8 )
‘
∗
’.
. Example: to set the first 3 ports 1-3 as active, enter 13
‘
∗
’.
MULTIPAL PROGRAMMING SUMMARY
Feature
Enter
Options & MP-415’s Response
Prompts
Lift receiver on Extension
with no phone line
connected
“ PAL Ready “
To Enter Programming Mode
##
“Program”
Answer Mode
6 n
«
0= Normal Answer, Ringback
1= Answer & Prompt (Default)
2= Answer & Quiet
MP-415 Answers Call on # of
Rings
2 n
«
n = Number of Rings, 1-6 (Default
= 2)
MP-415 Rings to the
Extension
7 n
«
n = Number of Rings, 1-6 (Default =
4)
Security Type Select
5 n
«
0= Security Off (Default)
1= Security for Control functions
Only.
2= Full Security, control &
extension ring.
Security Code
# n…
«
n… = up to six digits. Example: for
Security Code 123 enter #123*
Reset Time ( Power, Switch
Reset)
9 n
«
n = 1 - 9 five second increments
Default Example 92* sets pulse to
10 Sec.
Active Ports
1 n
«
n= number of active or in use ports.
Example: three active, enter
13*
n =The Number to Enter.
«
= end of this program instruction
When each full programming command is entered correctly and accepted by MP-415, MP-415 will
respond
“OK“
if accepted or
“ERROR“
if not accepted. If an error is made, the program step may be
repeated.
Example: To program the number of rings (from 1 to 6) before MP-415 answers a call. In the
programming mode, enter the digit 2 followed by the desired number of rings, followed by the
«
to end this
program instruction. ( 2 + 3 +
«
) will program MP-415 to answer in three rings. MP-415 will respond
“OK“.
