iboot-dc_v181024e
iBoot-DC
Page 7
Change the IP Address
1. Click on the row containing the iBoot-DC to be set. The row will become highlighted.
2. From the menu select Set | Network Settings
3. Select the IP Mode DHCP if you want the network to assign parameters
4. Select the IP Mode Static if you want to define all network parameters manually.
5. Click OK when done.
Once the IP Address is set, other all other operational features of the iBoot-DC can be set up. Click on
Discover again to refresh the display, highlight the desired iBoot-DC and click on Manage | Launch
Browser. See Section 6 to configure the iBoot.
The DMU can also be used to return an iBoot-DC to its Factory Default condition. This can be used to
recover an iBoot-DC with a lost password. Highlight an iBoot-DC from the display and select Set | Factory
Defaults. Using the Utility to reset defaults will not change the network settings allowing you to re-access
the unit. You can also use Set | Admin Password to reset only the admin password parameter back to
default. These reset options must be done within the first two minutes of powering up the iBoot or pressing
the reset button.
4.3.
Other ways to set the IP Address
1. Web Browser via the Set-up Page
– See Section 6.2
2. Command Line Interface See Section 8
