Quick Start Guide
Quick Start Guide
9
Step 5 - Powering up the System
Connect power cables (single cable for ATX) then plug into and turn on the mains supply.
Switch on the system.
1
3
If you have an ATX powered system, go straight to step 2 below.
For systems with an RPSU:
During transit, the
Power Supply Modules are removed therefore you are required to fit them prior to using your VSNMicro 600.
To fit the
Power Supply Modules, remove the all packaging and carefully slide them into the power supply unit on the rear of the
system with the protective grill uppermost. You will feel and hear a firm click when they are in place. For detailed
instructions on how to fit the
Power Supply Modules see the system User Guide which can be found on the Recovery Media.
Never use force when inserting the Power Supply Modules as this can cause damage not covered under the Datapath warranty.
2
Ensure Power Supply Modules are correctly fitted.
