Operation
Chapter 6 - Operation
This chapter will cover:
•
Switching on
•
Initial system boot on delivery
•
Setting up the operating system
•
Opening WallControl 10/Wall Control-red
•
Displaying source captures
6.1 Switching On
When switching the system on for the first time you will need to complete the initial system boot steps as described in Initial
System Boot on Delivery below.
6.1.1 Switching on the System
Ensure the mains power cable is correctly connected then turn on the VSNMicro 600.
27
Turn on the main system power switch which is located on the front panel.
The BIOS and boot messages will be displayed on the control screen (if connected) as the system boots. Once the system boot
up is complete, the display wall will open up into a Windows® desktop.
6.2 Initial System Boot on Delivery
Once the system has been configured in the factory the operating system is resealed, meaning that when switching on the
system for the first time the operating system setup commences.
You will be prompted to enter information to set up your VSNMicro 600.
6.2.1 Select Language Pack
You will now be prompted to set up your Windows® 7 operating system starting with selecting the language option you require.
Language selection is the responsibility of the customer and is not part of the system pre configuration prior to shipment.
Windows® 7 language settings can be changed using
Control Panel/Region and Language
on the
Keyboard and Languages
tab. Language packs are available to download as optional updates through Windows Update. The following languages are
pre-installed:
•
Simplified Chinese
•
English (UK)
On/Off
