Hardware
22
Hardware
4.2 Power Supply Modules (RPSU System)
The
Power Supply Modules are removed from the system during transit, therefore you are required to fit them prior to using
your VSNMicro 600.
To fit the
Power Supply Modules, remove all packaging and carefully slide them into the power supply unit on the rear of the
system with the protective grill uppermost. You will feel and hear a firm click when they are in place.
Never use force when you insert the Power Supply Modules into the Power Supply Unit as this can cause damage not covered
under the Datapath warranty.
Power
Supply
Modules
4.2.2 Removing the Power Supply Modules
Should you wish to ship your VSNMicro 600 you are strongly advised to remove the Power Supply Modules prior to shipping.
To remove the Power Supply Modules gently press down on the locking catch as shown and this will release the module
enabling it to be gently pulled out and removed from the Power Supply Unit.
4.2.1 Fitting the Power Supply Modules
