DataON DNS-2670, Руководство пользователя

Страница: 18 / 32

Hardware Operations
2.4 3.5” SATA/SAS HDDs
DNS-2670 can support 70 x 3.5” hot-pluggable SATA/SAS HDDs.
Reminder
Before you remove or install the 3.5” SATA/SAS HDDs, please follow the steps below:
Step 1: Make sure all of the SIM nodes are not turned on and the server is not connected
to AC power.
Step 2: Remove the chassis cover. To remove the chassis cover, see “0
To remove the chassis
cover
.
Step3: Disconnect all necessary cables.

Take note of the drive tray orientation before sliding it out.
 The tray will not fit back into the bay if inserted incorrectly.
2.4.1
To remove a Disk
Push the release button.
Pull the lever open.
Slide the Disk assembly out of the Disk bay.
Figure 2-10 Removing the Disk Assembly
Loosen the four screws that secure the Disk.
Lift the Disk out of the Disk tray.
15