background image

IBM FlashSystem 7200

IBM Storwize V7000 Gen3

NVMe Control Enclosure

Getting Started Guide

IBM

Overview

This document describes the installation procedures for the following IBM FlashSystem

®

 and Storwize

®

 systems. It also contains

information to help you plan the system configuration. This information applies to the following machine type and model (MTM) numbers.

System

MTMs

IBM FlashSystem 7200 control enclosure

2076-824 and 2076-U7C

Storwize V7000 Gen3 NVMe control enclosure

2076-724 and 2076-U7B

Important: This document is intended to be used by persons who are experienced with installing these systems. Before you use this

information and the product it supports, read the following topics:

Installation worksheets

 on page 8

Safety and environmental notices

 on page 12

Notices

 on page 13

IBM Systems Environmental Notices

 and 

IBM Systems Safety Notices

 (provided on a DVD with your product order)

IBM Knowledge Center (

https://ibm.biz/BdqxdY

) contains more information about preparing the physical environment before the

installation; it also provides information about configuring, managing, and servicing the system after installation. The IBM Knowledge

Center is updated between product releases to provide the most current documentation.

Unpacking and verifying the contents

Before you start the installation process, ensure that the following items are available.

Philips screw driver

Box knife

Flat-blade screw driver (optional)

Three Ethernet cables

The control enclosure and the following related parts are included in one box. The enclosed inventory sheet lists the part numbers of the

items that were ordered. Items, such as drives and networking adapters, are preinstalled inside each node canister.
• Control enclosure with the following components preinstalled:

– Two node canisters with optional networking adapters, SFPs, and memory.

Each IBM FlashSystem 7200 node canister contains three networking adapter slots. The same number and type of adapters must be

installed in each node canister. The control enclosure can contain 0, 2, 4, or 6 networking adapters.
Each Storwize V7000 Gen3 node canister has three adapter slots. By default, slot 3 contains a 4-port 12 Gbps SAS networking

adapter. If ordered, the same number and type of networking adapters are installed in slots 1 and 2 of each node canister. The

control enclosure can contain 2, 4, or 6 networking adapters.

– Two power supply units (PSUs).
– A combination of 24 drives and drive blanks.

The number of drives and drive blanks varies, according to the number of drives that were specified in the product order. For

example, if 12 drives were ordered, the drives and 12 drive blanks are preinstalled in the control enclosure.

• Rail kit, which includes the left and right rails, and 8 securing M5 screws and locating pins.
• Cables, if they were ordered, for the type and number of networking adapters that are installed in each node canister.
• Two power cables.

1

Summary of Contents for FlashSystem 7200


















Reviews: