Rear Brush
(Shown Removed)
Lid (Do Not Remove, Shown Removed for Clarity)
Channel
(12 Places)
Rear Bracket
(Qty: 2)
Front Bracket
(Qty: 2)
Blank Adapter Plate
(Shown Removed)
(Qty: 12)
Mounting Holes
(Flush Position and
Protruding Position)
Chassis
Note:
Mounting Hardware Included, Not Shown
Arrow and “TOP”
Marking
1
of 4
Instruction Sheet
408-32067
AMP NETCONNECT 2U Multi-Fiber
Push-On (MPO) Secure Rack-Mounted
Enclosure Assembly 1553761-1
Figure 1
1. INTRODUCTION
2U MPO Secure Rack-Mounted Enclosure Assembly
1553761-1 is used to house and manage MPO Secure
fiber optic connections. The enclosure fits into a
standard 483-mm [19.0-in.] Electronic Industries
Alliance (EIA) rack or cabinet.
Dimensions in this instruction sheet are in metric
units [with U.S. customary units in brackets].
Figures are not drawn to scale.
NOTE
i
To obtain information on AMP NETCONNECT
products, contact CommScope or visit our
website at www.commscope.com
2. DESCRIPTION
The enclosure consists of a chassis with a lid, 12 blank
adapter plates (with attaching hardware), 2 front
mounting brackets, 2 (right and left) rear mounting
brackets, and mounting hardware. The mounting
holes in the enclosure chassis provide a choice of two
positions when mounting the enclosure onto the rack
or cabinet. See Figure 1.
The chassis features 12 channels for routing cable
and a rear brush. The rear brush is used to conceal
the inside of the chassis. Each channel is marked on
the front and back of the chassis to identify the
adapter plate it supports.
The enclosure accepts OM3 Hydra Kits 2193057-[ ],
SM Hydra Kits 2193758-[ ], and Cable Management
Adapter Plate Assembly 2111481-1. MPO adapter
plates are included with the hydra kits.
3. SAFETY PRECAUTIONS
DANGER
STOP
To avoid personal injury, ALWAYS wear eye
protection when working with optical fibers.
NEVER look into the end of terminated or
unterminated optical fibers. Laser radiation is
invisible, but can still damage eye tissue.
DANGER
STOP
To avoid personal injury, NEVER use defective or
damaged product. Punctured or stray laser
radiation may degrade system performance.
ALWAYS replace defective or damaged product
immediately.
— DO NOT remove the dust cap plug from a port
when the port is not in use.
®
FEB 2017 Rev B
To obtain information on
CommScope
® products, visit our website at
www.commscope.com/SupportCenter
©2017 CommScope, Inc.
All Rights Reserved
This product is covered by one or more U.S.
patents or their foreign equivalents. For patents, see
www.commscope.com/ProductPatent/ProductPatent.aspx
