DataON DNS-2670, Руководство пользователя

Страница: 17 / 32

Hardware Operations
2.3
Power Supplies
This server is designed with four 1200W power supplies.
Reminder
Before you remove or install the power supply, please follow the steps below:
Step 1: Disconnect all necessary cables.
2.3.1 To remove the power supply
Pull down the handle.
Press the retaining clip to the right side along the direction of the arrow.
At the same time, pull out the power supply. (The power supply takes considerable force to
remove.)
Figure 2-8 Removing the Power Supply
2.3.2 To install the power supply
Insert the replacement power supply firmly into the bay. The retaining clip should snap.
Connect the AC power cord to the replacement power supply.
Figure 2-9 Installing the Power Supply
14