background image

CiB

9224

 

V12

 

User

 

Manual

 

 

2

 

 

Safety  Symbols

 

 

Before troubleshooting, you must be familiar with the safety information listed below. In  order to avoid 
any potential hazards, the following symbols may be placed on some components  of the system. 
The shape and the color of symbols shown below are mainly for your reference. Please take the actual 
shipment as standard. 
 

    

 

Indicates the potential hazard of energy circuits or electric shock. To reduce 
the risk of injury from electric hazards, do not open this enclosure. 

Warning

: Any surface or area of the equipment marked with this symbol 

indicates the presence of electric shock hazards. The enclosed area contains no 
operator serviceable parts. 

    

 

Indicates the potential hazard of electric shock. The enclosed area contains no user 
of field serviceable parts. Do not open for any reason. 

Warning

: To reduce the risk of injury from electric shock hazards, do not open this 

enclosure. 

    

 

Indicates the presence of a hot surface or hot component. 

Warning

: To reduce the risk of injury from a hot component, allow the surface to 

cool before touching it. 

    

 

Any RJ45 receptacle marked with this symbol indicates a network interface 
connection. 

Warning

: To reduce the risk of electric shock, fire, or damage to the equipment, do 

not plug telephone or telecommunications connectors into this receptacle. 

    

 

This symbol, on power supplies or systems, indicates that the equipment is supplied 
by multiple sources of power. 

Warning

: To reduce the risk of injury from electric shock, remove all power cords to 

completely disconnect power from the system. 

 

Weight in kg. 

Weight in lb. 

This symbol indicates that the component exceeds the recommended weight for one 
individual to handle safely. 

Warning

: To reduce the risk of personal injury or damage to the equipment, observe 

local occupational health and safety requirements and guidelines for manual material 
handling. 

 

 
Safety  Precautions

 

 

Observe the following safety precautions when you are connecting or disconnecting any  device. 

Содержание CiB-9224 V12





































Отзывы: