DataOn Storage CiB-9224 V12, Техническое руководство

Страница: 26 / 36

CiB ‐ 9224 V12 User Manual
22
2.3.2 To install the power supply
Insert the replacement power supply firmly into the bay. The retaining clip should snap. Connect the
AC power cord to the replacement power supply.
Figure 2-6 Installing the Power Supply
2.4 2.5” SAS HDD / SSD
The CiB-9224 V12 support up to 24 x 2.5” hot-pluggable SAS HDD / SSD. You don’t need to power-off
the system when removing or installing a HDD / SSD.
The location of 2.5” SAS HDD / SSD assemblies on the system is shown below:
Figure 2-7 2.5” SAS HDD / SSD Locations

Take note of the drive tray orientation before sliding it out.

Tray will not fit back into the bay if inserted incorrectly.