5
C)
Press the
FEED Key
several times, until media tracking is normalized through the printer. Then, while
feeding several more labels,
observe the flow
of the
Ribbon
from the
Supply Hub
. Proceed
according to your observations:
If the ribbon flow is rippling, or if bagging is present, proceed to
D
;
or,
If the ribbon flow is evenly tensioned and smooth, proceed to
E
.
Supply
Hub
observe
for flow
Ribbon
FEED
Key
D)
Slightly loosen the
Support Cover Screw
and, while repeatedly pressing the
FEED Key
, slowly
adjust the
Idler Adjustment Screw
to
smooth the ribbon flow
from the
Supply Hub
. Afterward,
carefully tighten the
Support Cover Screw
, and then feed several more labels to verify your
adjustment.
Support Cover
Screw
Idler Alignment
Screw
smooth the ribbon flow
Supply Hub
