Datamax-ONeil A-Class Скачать руководство пользователя страница 85

Страница: 85 / 334

Extended System-Level Command Functions

Class Series 2 Programmer’s Manual

(IL) Imaging Mode –

This command instructs the printer whether to pre-image the

label format:

Value

Units /

Interpretation

Imaging Mode Definition

Multiple Label

The printer images multiple labels as memory

permits, achieving the fastest throughput; however,
if time-stamping, the time will reflect the moment

the label is imaged rather than when actually

printed.

Single Label

The printer images the next label only after the

previous label has been successfully printed. Single

processing provides time-stamps that are more

accurate, but it slows label throughput time.

(IM) Internal Module –

This command sets the number of 1K blocks (or 4K blocks

for Non-Display models; see the

<STX>KM

command) allocated for Module D.

(LA) Label Alignment

– This command prevents labels with lengths that are less

than the distance between the print head and the Media Sensor from being wasted at
power-up. See the appropriate

Operator’s Manual

for specific information. Unless

otherwise noted, the following information pertains to all Non-Display models:

Value &

Mode

Media Type

Description / Operation

N =

Disabled

6.5-inch and greater

(

≥

16.51 cm) die-cut,

notched, reflective,

continuous, and

multiple form lengths.

When disabled, Non-Display models begin printing
at the current location, unless equipped with RTC

(Real Time Clock); see note below. The EX2

assumes the label position has not moved while
power was “Off” and that no system changes have

occurred.

A =

Auto

6.5-inch or less

(

≤

16.51 cm)

die-cut, notched, and

reflective

In auto mode, the printer will verify the label

position using the provided Alignment Length

before printing the first label after power-up. Press
and hold the FEED Key four seconds so the printer

will measure the length of the label. The EX2 will

only measure the label length when new label stock
is loaded.

Y =

Enabled

When enabled, the printer will verify the label

position using the provided Alignment Length
before printing the first label after power-up.

Specify the Label Alignment Length using the

<STX>KcAL

command, or the Setup Menu.

Table 5-3: Label Alignment Command



The Real Time Clock (RTC) option allows the position-state of the label to be stored,

thus eliminating the need for an alignment prior to first label printing (assuming the
label has not moved during power off). If the stock has been changed then a Forced

Alignment (press and hold FEED 4 seconds) is recommended.

Содержание A-Class















































































































































































































































































































































Результаты поиска

Содержание A-Class

Отзывы:

Похожие инструкции для A-Class

Бренды по названию

Популярные бренды

Datamax-ONeil A-Class, Руководство программиста

Результаты поиска

Содержание A-Class

Отзывы:

Похожие инструкции для A-Class

Бренды по названию

Популярные бренды