HMI BUTTON CONFIGURATION
PRODUCT REFERENCE GUIDE 7
System Rollback and Factory Reset (optional)
It is possible to perform a System Rollback to the second to last software version
installed or a complete device Factory Reset by pressing and holding down the HMI But-
ton while powering up the device.
For System Rollback, hold down the HMI Button until all LEDs blink simultaneously for
about 3 seconds, then release it when they are steady on.
All saved jobs are kept with a System Rollback. Two consecutive System Rollback proce-
dures lead to the factory software version keeping all the saved jobs.
For Factory Reset, hold down the HMI Button until all LEDs blink simultaneously for
about 3 seconds, then release and press it again during the LED blinking sequence.
All saved jobs are erased with a Factory Reset.
NOTE
It is suggested to close the Smart-VS WebApp before performing the pro-
cedures above. Connect to or refresh the WebApp to check the device soft-
ware version (see "
).
