SG-PSB INSTRUCTION MANUAL
5
Once the product has been completely
inserted and its position along the column
adjusted, replace the cover (Fig. 4).
To adjust the position of the product along the
column, slightly unscrew the M5x8 UNI 5931
screws, which can be accessed from the
outside by using a special Allen key; if the
column is in a vertical position, make sure the
product does not slide accidentally towards the
bottom.
Fig.
4
SG BODY MOUNTING
As described in the previous section (SG2, SG4-B, SE series mounting)
the ST-PS4-SG Body kit can be used to install the SG Body versions in the
same housing as the SG-PSB (Fig. 5).
Fig. 5
Fig. 5
M5x8 UNI 5931
