INSTALLATION
15
2
As far as linear codes are concerned, the Dragon™ is the most suitable scanner for
Rhino™'s environment:
-
Dragon™ D: either connect it to COM2 through CAB-350/CAB-408 without power supply,
or to COM1 through CAB-327/CAB-362 with external power supply.
- Dragon™ M: either connect it to COM2 through STAR-Modem™ without power supply,
or to COM1 with external power.
As far as 2D codes are concerned, the Lynx™ is the most suitable reader to Rhino™'s
environment: connect it to COM1 through CAB-327/CAB-362 with external power supply.
2.4.1 Laser Barcode Scanner Warnings
The following directions are general indications to be observed when using a laser barcode
reader with Rhino™. For further information and details, refer to the reader user's manual.
•
Do not look into the laser’s lens.
•
Do not stare directly into the laser beam.
•
Do not remove the laser caution labels from the scanner.
•
Do not connect the tethered laser barcode scanner to any other device.
CAUTION
Please read the caution labels and the user's manual of connected
scanner. Avoid exposure. Laser light is emitted from the scanner’s
aperture. Use of controls, adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure. The scanner uses laser light.
CAUTION
Do not pour, spray, or spill any liquid on the scanner. The Barcode
Scanner contains the circuitry, scanning motor and laser. Handle with
appropriate care.
