background image

RHINO™ 

 

4  

 

1.5 KEYBOARD 

 
The RHINO™ has an integrated, custom keyboard with ABCD layout and universal overlay. 
 
This keyboard features a 57 key keyboard. The keyboard is constantly illuminated. 
 
The keyboard has 101 keyboard functions, including a numeric keypad. Please refer to the 
section "Key Maps" for keypress combinations. 
 

The ABCD Keyboard: 

 
 

 

 

 

Figure 5 - The ABCD Universal Keyboard  

 
The keyboard includes two special keys: FUNC (green) and CTRL (yellow) located in the 
bottom port. 

Select FUNC to activate any of the functions printed in green. 

Select CTRL to activate any of the functions printed in yellow. 
 
 

1.6 CONTROL 

KEYS 

 
The RHINO™ has several control keys. 
 
The RHINO™ FUNC key plus the A and B keys control the LCD display contrast in the 
following way: 

Note:

 press FUNC once and then keep pressed the control letter until the right contrast is 

reached. 

 

Additional 

Key 

Key Description 

FUNC 

Pressing this key sequence increases the contrast of the display 

FUNC 

Pressing this key sequence decreases the contrast of the display 

 
 

FUNC and CTRLSpecial Keys

Содержание RHINO


















































Отзывы: