Datalogic QuickScan QD24 series, Руководство по продукции

Страница: 196 / 314

Enter/Exit Programming Mode
186 QuickScan™ I QD24XX/QBT24XX/QM24XX
China Sensible Code
Set Length 1
Specifies one of the bar code lengths for China Sensible Code Length Control on page 185 .
Length 1 is the minimum label length if in Variable Length Mode, or the first fixed length if in
Fixed Length Mode. Characters can be set from 0001 to 7,827 characters in increments of 0001
(pad with zeroes).
See
page 243 for detailed instructions on setting this feature.
$CCSL1
Select China Sensible Code Length 1 Setting
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
characters in
Appendix D, Keypad
representing
your desired character(s). End by scanning the ENTER/
EXIT bar code again.
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
0001 = Length 1 is 1 Character