Datalogic QuickScan QD24 series, Руководство по продукции

Страница: 186 / 314

Enter/Exit Programming Mode Plessey
176 QuickScan™ I QD24XX/QBT24XX/QM24XX
Plessey Set Length 1
This feature specifies one of the bar code lengths for Plessey Length Control on page 175 .
Length 1 is the minimum label length if in Variable Length on page 243 Mode, or the first fixed
length if in Fixed Length on page 243 Mode. Length includes the bar code’s data characters
only. The length can be set from 01 to 50 characters.
Table 23 provides some examples for setting Length 1. See page 243 for detailed instructions
on setting this feature.
Table 23. Plessey Length 1 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting 01 Characters 07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT Plessey LENGTH 1 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘1’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
$CPLL1
Select Plessey Set Length 1 Setting
Make a mistake? Scan the CANCEL bar code to abort and not save
the entry string. You can then start again at the beginning.
~
CANCEL
DEFAULT
01 = Length 1 is 1 Character