Datalogic QuickScan I QM21X1, Краткое руководство пользователя

Страница: 15 / 48

Connecting the Base Station
Quick Reference Guide 7
Table 1. Radio Base LEDs
Charging the Battery Pack
To charge the battery, simply insert the QuickScan reader into
the base. When the scanner is fully seated in the cradle, it will
sound a “chirp” to indicate that the cradle has detected the
scanner connection.
The LEDs on the base (shown in
Table 1 on page 7 ) will indi-
cate the status of the battery.
Alternatively, the battery can be charged by connecting the
reader directly to a host through the micro-USB connector
available in the bottom of the handle, as shown.
LED STATUS
Power on /
Data
Yellow On = Base is powered
Yellow Blinking = Base receives data and
commands from the Host or the Reader.
Charging Red On = the Battery is charging.
Charge com-
pleted Green On = the Battery is completely
charged.
Ch
Charge com-
pleted Red and Green Blinking together = the
Reader is not correctly placed onto the
Base.
NOTE
Before using the Battery, read “Battery Safety” in
the accompanying Regulatory Addendum. Data-
logic recommends annual replacement of
rechargeable battery packs to ensure maximum
performance.
Micro-USB
Connector