Connecting the Base Station
Quick Reference Guide
3
2.
Engage the locking mechanism by pushing up the lever
as far as it will go.
Figure 2. Lever in locked position
Connecting the Base Station
Figure 3
shows how to connect the Base Station to a termi-
nal, PC or other host device. Turn off the host before connec-
tion and consult the manual for that equipment (if necessary)
before proceeding. Connect the interface cable before apply-
ing power to the Base Station.
NOTE
it is good practice to put the scanner in the
locked condition at the end of the working shift,
or when not in use for an extended period of
time. This will ensure that the scanner is fully
seated for complete battery recharge.
NOTE
The QuickScan QM21X1 reader can also be Pow-
ered by the Terminal. When powered by the Termi-
nal, the battery charger is automatically set as
Slow charge.
For some specific interfaces, hosts, or lengths of
cable the use of an external power supply may be
recommended for full recharging capability (see
"Technical Specifications" on page 26
for more
details).
Содержание QuickScan I QM21X1
Страница 4: ...ii QuickScan QM24XX Ergonomic Recommendations 36 Cleaning 37 Services and Support 38...
Страница 47: ......
