Datalogic PowerScan 9501-AR Series, Руководство по продукции

Страница: 94 / 362

C
ODE
IATA
on page 139
C
ODABAR
on page 140
ABC C
ODABAR
on page 146
C
ODE
11
on page 149
GS1 D
ATA
B
AR
™ O
MNIDIRECTIONAL
on page 153
GS1 D
ATA
B
AR
™ E
XPANDED
on page 154
GS1 D
ATA
B
AR
™ L
IMITED
on page 159
C
ODE
93
on page 160
on page 166
P
LESSEY
on page 170
Enter/Exit Programming Mode
84 PowerScan™ PD9531-AR/PBT9501-AR/PM9501-AR
Default settings are indicated at each feature/option with a green arrow.
Also reference Appendix C, Standard Defaults for a listing of the most
widely used set of standard factory settings.
To set most features:
1. Scan the ENTER/EXIT PROGRAMMING bar code at the top of applicable
programming pages.
2. Scan the correct bar code to set the desired programming feature or
parameter. You may need to cover unused bar codes on the page, and
possibly the facing page, to ensure that the reader reads only the bar
code you intend to scan.
3. If additional input parameters are needed, go to Appendix D, Keypad ,
and scan the appropriate characters from the keypad.
Additional information about many features can be found in the “Ref-
erences” chapter.
If you make a mistake before the last character, scan the CANCEL bar
code to abort and not save the entry string. You can then start again
at the beginning.
4. Complete the programming sequence by scanning the ENTER/EXIT
PROGRAMMING bar code to exit Programming Mode.
MSI