Datalogic Matrix 450, Справочное руководство

Страница: 41 / 160

INTRODUCTION
29
2
2.4 EXTERNAL MEMORY BACKUP AND RESTORE THROUGH
VISISET™
The "External Memory Backup" or "External Memory Restore" functions allow performing
Complete Configuration and Environmental parameter storage for network and reading
devices. Backup & Restore can be applied to any device connected to a Backup Module
(BM100) or QL500 (Connection Ethernet) or BM2x0 (Ethernet Module) regardless
of the devices' network configuration. Backup & Restore automatically checks whether a
previous backup or configuration is already available for each device speeding the procedure
up and making it more secure.
These functions are supported by VisiSet™ for all reading devices having sw 6.10 and later
when connected to:

CBX + BM100 and/or BM2x0 (sw release 2.02.01 and later)

QL500 (Ethernet TCP/IP) (sw release 2.02.01 and later)
NOTE

Before executing a Backup on a BM100 backup module make sure the Write
Protection switch is set to Unlocked.

If BM100 and BM2x0 are both installed B&R is automatically performed only on
the BM100 module.

BM2x0 can execute B&R only with Network up and running (network cable
connected).

QL500 can backup up to 10 nodes ( 9 slaves).
Backup
To perform a Backup:
1. Select "External Memory Backup" from the VisiSet™ Device menu
2. You will be warned that the previous backup will be overwritten. Confirm by clicking Yes.