MATRIX 300™ REFERENCE MANUAL
18
1
STEP 7
– TEST MODE
Use a code suitable to your application to test the reading performance of the system.
1. Enter the
Test
function by pressing and holding the X-
PRESS™ push button until the
Test LED is on.
2. Release the button to enter the
Test
function.
Once entered, the Bar Graph on the five LEDs is activated and if the reader starts
reading codes the Bar-Graph shows the Good Read Rate. In case of no read condition,
only the STATUS LED is on and blinks.
Figure 10
– X-PRESS™ Interface: Test Function
3. To exit the Test, press the X-
PRESS™ push button once.
NOTE:
By default, the Test exits automatically after three minutes.
The Bar Graph has the following meaning:
Figure 11
– Test Function Bar Graph
≥
95
%
≥
20
%
≥
40
%
≥
60
%
≥
75
%
Содержание Matrix 300
