Datalogic lynx bt, Справочное руководство

Страница: 26 / 200

LYNX™ BT
2
The field of view indicated by the aiming system will be smaller when the Lynx™ BT
is closer to the code and larger when it is farther from the code. Symbologies with
smaller bars or elements (mil size) should be read closer to the unit. Symbologies
with larger bars or elements (mil size) should be read farther from the unit. (See
chapter 8 for further details).
2.2 NORMAL OPERATION
Lynx™ BT normally functions by capturing and decoding codes.
Point the reader at the target and pull the trigger partially to enable the aiming
system. Then, pull it completely to capture and decode the image. The reader will
repeatedly flash until the symbol is decoded or timeout is reached. In between the
flashes of the reader, the aiming system keeps on showing the field of view on the
target (see Figure 3
).
As you are reading code symbols, adjust the distance at which you are holding the
reader.
NOTE
The LYNX™ BT hand-held reader aiming system is designed for
general reading and decoding of 1D and 2D symbols. Some variation
in reading distance will occur due to narrow bar width and other
factors.
.3 IMAGE CAPTURING 2
Lynx™ BT can also function as a camera by capturing images of labels, signatures,
nd other items.
protocol; while using the cradle with USB COM
interface no protocol is required.
a
In order to capture an image, the user should read a Capture Image code, then point
at the image subject and pull the trigger. This way, the image will be captured and
sent to the host PC. Lynx™ BT then returns to normal operation. To capture another
image you must read another Capture Image Code of the same or a different Preset
Configuration.
You can use the aiming system to position the reader from the object (ensure the
reader is about centered over the target). Adjust the distance at which you are
holding the reader (see Figure 3).
The image will be transferred to the host PC through the OM-10000 BT cradle or a
BT device. If using the cradle with the RS232 interface or a BT device, the image will
be transferred via XMODEM_1K
6