LT-700 LINEAR ARRAY
LIGHTING SYSTEM
DESCRIPTION
The LT-700 Linear Array Lighting System provides a high intensity light
source designed for the following applications:
with uneven, noisy and scratched surfaces
where dot peening or laser etching codes are directly marked onto
metal surfaces or PCBs and need to be highlighted. Here the use
of more than one LT-700 at different positions can remove any
shadowing effect.
in the presence of highly reflective surfaces (metal, glass, etc.)
causing direct reflections. Low light path to surface angles strongly
reduce direct reflections.
MECHANICAL DIMENSIONS
M 3 n°2
DEPTH 5
M 3 n°2
DEPTH 5
68
[2.68]
33
[1.28]
31.0
[1.22]
15.5
[0.61]
8.0
[0.31]
28
[1.
10]
54.0
[2.13]
17
.0
[0
.67]
8.0
[0.31]
15.5
[0.61]
54.0
[2.13]
M 3 n°2
DEPTH 5
9.0
[0.3
5]
Matrix 210™ Straight Model
Matrix 210™ 90° Model
Matrix 410™
NOTE
The Matrix 410™ reader does not mount directly to the
BK-21-000 bracket.
WIRING
Wire Color
CBX/Matrix Signal
Meaning
Red
Vdc
10 to 30 Vdc
Black GND
Ground
White Earth
Shield/Earth
Ground
Green
O1- or O2-
Control Signal -
Yellow
O1+ or O2+
Control
MOUNTING LT-700
The following parts are required for mounting:
LT-700 Linear Array Lighting System
Accessory BK-21-000 LT-700 Fixing Bracket
Example BK-21-000 Assembly
1. Mount the rotating bracket
A
(2 pieces) onto the Reader Mounting
Bracket
B
(for straight models) or
B'
(for 90° models) using 2 of
the M3 screws. Do not completely tighten the screws.
2. Mount the LT-700 sliding bracket
C
onto the rotating bracket
A
using 2 of the M3 screws and 2 washers. Do not completely
tighten the screws.
3. Mount the LT-700
D
onto the LT-700 sliding bracket
C
using 2 of
the M3 screws and 2 washers. Do not completely tighten the
screws.
4. Mount the Matrix 210™ reader to the Reader Mounting Bracket
B
(for straight models) or
B'
(for 90° models).
If LT-700 is used with Matrix 410™, the reader must be mounted
separately.
5. Mount the entire assembly to the reading station frame (i.e. Bosch
profile).
6.
Wire the LT-700 to the CBX according to the Wiring table.
7.
Follow the Positioning instructions in the following paragraph.
mm
[inch]
A
C
D
B
B'
