background image

LED and Audio Indicators

8

Jade™ X7 Portal Scanner

Audio Indicators

Audio indications are WAV files stored in the system that are played by the scanner. The table below 
shows factory default settings.

NOTE

Table 2. Audio Indications

EVENT

AUDIO INDICATION

COMMENT

Start-up

factory/startup.wav

The system is starting up.

Item Unmatched

factory/error_beep.wav

Scanned label data was not matched with an 
object in the scan volume.

Item With No Label Data

factory/
300Hz_600_10_400.wav

There is no label data for an item which 
passed through the scan zone.

Item With One Label

factory/1kHz_400_10_300.wav

An item was successfully scanned, returning 
data from one label.

Item With More Than 
One Label

factory/1kHz_400_10_300.wav

Data from two or more labels was scanned 
for one item.

Sound PC Volume

100 (factory default)

The volume is selectable from a numeric 
range of 0 to 100.

Your system may have been modified with custom sound files that are unique to your installation. See 
the Product Reference Guide (PRG) for more information about this configurable feature.

If your system is programmed to sound audio indications, but no indications can be

 

heard when expected, installation of external speakers might be required. Connect the

 

external powered speaker(s) at the 3.5mm line out speaker connector (audio jack) at 
the front of the system control box.

Содержание Jade X7

















Отзывы: