Datalogic Jade X7, Краткое руководство пользователя

Страница: 11 / 16

LED and Audio Indicators
Quick Reference Guide 7
LED and Audio Indicators
The scanning system provides onboard LED indicators (one multi-color “illuminating logo” per arch).
The system may offer additional custom LEDs, audio sounds and other indicators which are unique to
your installation. Be sure to check the documentation for the checkstand and other equipment for fur-
ther information.
Arch Indicators
LED Indicator
(same on both arches)
One LED indicator is located on each arch (Entry and Exit) in the same position on each arch as shown.
See the Table below for a listing of standard factory arch LED indications. The indications are not con-
figurable.
Table 1. Arch LED Status Indicators
DESCRIPTION COLOR PATTERN
Arch Initial Program
Load Event
Momentary
Green (5s) – Off (30s)
Startup
Cycle
Red (.5s) – Green (.5s) –
Blue (.5s)
Arch Completed
Selftest Event
Momentary
Green (1s) – Off (.5s)
Ready – POS not
Connected
Cycle
Black (.25s) – Blue (.25s) –
Black (.25s) – Blue (2.25s)
Ready – Reading
not Enabled
Steady
Blue
Ready – Reading
Enabled
Steady
Green
Sleep
Cycle
Blue (1s) – Off (1s)
Fault
Cycle
Red (2s) – Off (2s)
Calibration
Cycle
Green (2s) – Off (2s)
Service
Cycle
Blue (2s) – Green (2s)