background image

Datalogic USA, Inc. Limited Factory Warranty

10

Jade™ X7 Portal Scanner

Warranty Exclusions

The Datalogic Factory Warranty shall not apply to:

(i) any product which has been damaged, modified, altered, repaired or upgraded by other than Data-

logic service personnel or its authorized representatives;

(ii) any claimed defect, failure  or damage which Datalogic determines was caused by faulty opera-

tions, improper use, abuse, misuse, wear and tear, negligence, improper storage or use of parts or 
accessories not approved or supplied by Datalogic;

(iii) any claimed defect or damage caused by the use of product with any other instrument, equip-

ment or apparatus;

(iv) any claimed defect or damage caused by the failure to provide proper maintenance, including but 

not limited to cleaning the upper window in accordance with product manual;

(v) any defect or damage caused by natural or man-made disaster such as but not limited to fire, 

water damage, floods, other natural disasters, vandalism or abusive events that would cause 
internal and external component damage or destruction of the whole unit, consumable items;

(vi) any damage or malfunctioning caused by non-restoring action as for example firmware or soft-

ware upgrades, software or hardware reconfigurations etc.; 

(vii) the replacement of upper window/cartridge due to scratching, stains or other degradation and/or

(viii)any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch screen, trig-

gers etc.).

No Assignment

Customer may not assign or otherwise transfer its rights or obligations under this warranty except to a 
purchaser or transferee of product. No attempted assignment or transfer in violation of this provision 
shall be valid or binding upon Datalogic.

DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL 
OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRAN-
TIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATA-
LOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM DELAYS IN 
THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET FORTH IN THIS 
WARRANTY STATEMENT IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR WARRANTY CLAIMS. 
UNDER NO CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR 
ANY LOST PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAM-
AGES REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH 
DAMAGES.

Risk of Loss

Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall assume 
risk of loss or damage for product in Datalogic’s possession. In the absence of specific written instruc-
tions for the return of product to Customer, Datalogic will select the carrier, but Datalogic shall not 
thereby assume any liability in connection with the return shipment.

Содержание Jade X7

















Отзывы: