Datalogic GWY-01-PBS-01, Справочное руководство

Страница: 35 / 101

COMMAND PROTOCOL
27
4
4.4 CBX COMMANDS TABLE
The table below lists the CBx protocol RFID commands supported by the Gateway and RFID
Controllers.
Command ID Command Name Description
RFID Tag Commands
0x02 Lock Memory Block Write protects a block of tag memory
0x04 Fill Tag
Writes a specified data byte value to all
defined tag addresses
0x05 Read Data
Reads a specified length of data from a
contiguous (sequential) area of tag
memory
0x06 Write Data
Writes a specified number of bytes to a
contiguous area of tag memory
0x07 Read Tag ID Reads a tag’s unique tag ID number
0x08 Tag Search
Instructs the controller to search for a tag
in its RF field
0x0C Execute Macro
Instructs the controller to execute one of
its eight possible macros
0x0D Start Continuous Read
Instructs the controller to start or stop
Continuous Read mode.
0x0E Read Tag ID and Data
Reads a tag’s ID and the requested
number of bytes from tag memory
0x0F
Start Continuous Read Tag ID
and Data
Places the controller into (or out of)
Continuous Read mode and (when
evoked) will retrieve a tag’s ID.
Gateway Information Commands
0x10 Get Gateway Software Version
Retrieves the version number of the
firmware code installed on the Gateway
0x11 Get Gateway Name
Retrieves the Gateway’s user-defined
ASCII name
0x12 Get DIP-switch Settings
Retrieves the status of the Gateway
configuration DIP switches
0x13
Get Node Status List
Retrieves the operational status of the
Gateway Subnet Nodes
0x14 Get Notification Mask
Retrieves the user-defined 16-bit
“
Notification Mask ” that determines for
which events the Gateway notifies the
host PC
0x15 Get Last Gateway Error
Retrieves information from the Gateway
regarding the last or most recent error
that was experienced
0x16 Get Gateway Time
Retrieves the current date and time as
set internally on the Gateway