Datalogic Gryphon I GM440 Series, Руководство по продукции

Страница: 207 / 350

1D Code Selection Enter/Exit Programming Mode
Product Reference Guide 197
Code 93 Set Length 2
This feature specifies one of the bar code lengths for Code 93 Length Con-
trol . Length 2 is the maximum label length if in Variable Length Mode, or
the second fixed length if in Fixed Length Mode. Length includes the bar
code’s check, data, and full-ASCII shift characters. The length does not
include start/stop characters. The length can be set from 1 to 50 characters.
A setting of 0 specifies to ignore this length (only one fixed length).
Table 18 provides examples for setting Length 2. See page 283 for detailed
instructions on setting this feature.
Table 18. CODE 93 Length 2 Setting Examples
STEP ACTION EXAMPLES
1 Desired Setting
00 (Ignore This
Length)
07 Characters 15 Characters 50 Characters
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 93 LENGTH 2 SETTING
4
Scan Two Characters From
Appendix D, Keypad
‘0’ and ‘0’ ‘0’ and ‘7’ ‘1’ and ‘5’ ‘5’ AND ‘0’
5 Scan ENTER/EXIT PROGRAMMING MODE
Select Code 93 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
$CC9L2
DEFAULT
50 = Length 2 is 50 Characters