Datakom DKM-411, Руководство пользователя, Страница: 74 / 91

DKM-411 User Manual Rev_01 Firmware V-1.0
K46D03-EN - 74 -
Parameter Definition Factory Set Description
Mail Account Name d500_a
This is the account name appearing in the
“
from
” tab
of the e-mail recipient. (ex: datakom-d500@gmail.com)
Mail Account
Password
d500_1234 This is the e-mail password of above e-mail account.
Mail Server Address smtp.mail.yahoo.com
This is the Outgoing Mail Server Address of the above
e-mail account (ex: smtp.gmail.com)
E-mail Address-1
E-mail Address-2
E-mail Address-3 -
-
- These are e-mail recipient addresses where the unit is
intended to send e-mail messages. Up to 3 e-mails can
be sent at once.
Parameter Definition Unit Min Max Factory
Set
Description
Web Refresh Rate sec 0 240 5
The unit will refresh the web page with
this interval.
Ethernet Enable - 0 1 1
0: ethernet port disabled
1: ethernet port enabled
E-mail on IP Change - 0 1 0
0: no e-mail on IP change
1: e-mail sent on IP change
Ping Period sec 30 900 120
The unit will check the availability of
the internet connection with this
interval.
Rainbow Scada Refresh
Rate
sec 0 65535 60
The unit will update the distant
monitoring terminal with this rate.
Rainbow Scada
Address-1 Port
- 0 65535 90
This is the port number of the first
monitoring terminal address.
Rainbow Scada
Address-2 Port
- 0 65535 90
This is the port number of the
second monitoring terminal address.
Web Server Port - 0 65535 80
This is the port number of the
internal web server. The unit will
answer queries to this port only.
Modbus TCP/IP Port - 0 65535 502
Internal Modbus TCP/IP server’s port
number. The unit answers Modbus
requests to this port only.
SMTP Port - 0 65535 587 Port number used for e-mail sending.
20.13. ETHERNET PARAMETERS (continued)
Below ETHERNET related parameters are found in the
Controller Configuration group.