Datakom DKM-411, Руководство пользователя, Страница: 67 / 91

DKM-411 User Manual Rev_01 Firmware V-1.0
K46D03-EN - 67 -
The parameters below define the functions of relay outputs. The unit has 2 relay outputs. Each relay has
programmable functions, selected from a list.
OUTPUT FUNCTION LIST
Number Function Description
00 Horn Alarm relay output. Turns off automatically when timer expired.
01 Flashing Relay Bistable relay output. Periodically activates/deactivates with
programmed interval.
02 Phase Order Failure Active when the phase order is reversed.
03 Voltage Fail Active if at least one voltage is outside limits.
04 Voltage OK Active if all voltages are within limits
05 Internal alarm Active if any measurements based alarm exists
06 Input alarm Active if any alarm caused by digital inputs exists
07 Warning Active if any warning exists
08 Internal or Input alarm Active if any alarm exists
09 kWh tick kWh tick pulse output. Pulse length is programmable.
10 kVArh tick kVArh tick pulse output. Pulse length is programmable.
11 Low Voltage Alarm Active if at least one voltage is below low limit.
12 High Voltage Alarm Active if at least one voltage is above high limit.
13 Low Frequency Alarm Active if the frequency is below low limit.
14 High Frequency Alarm Active if the frequency is above high limit.
15 Frequency Alarm Active if the frequency is outside of limits.
16 Low Active Power Active if the total kW is below low limit.
17 High Active Power Active if the total kW is above high limit.
18 Active Power Alarm Active if the kW is outside of limits.
19 Capacitive Reactive Power Active if the capacitive reactive power is above high limit.
20 Inductive Reactive Active if the inductive reactive power is above high limit.
21 Reactive Power Alarm Active if capacitive or inductive reactive power is above limits.
22 Capacitive PF alarm Active is the capacitive PF value is below limit.
23 Inductive PF alarm Active is the inductive PF value is below limit.
24 PF alarm Active if capacitive or inductive PF is below limits.
25 High Current Alarm Active if at least one phase current is above limit.
26 THD-V Alarm Active if at least one voltage THD is above limit.
27 THD-I Alarm Active if at least one phase current THD is above limit.
28 THD Alarm Active if any THD is above limit.
29 Voltage Unbalance Active if the voltage unbalance is above limit.
30 Current Unbalance Active if the current unbalance is above limit.
31 Unbalance Alarm Active if the voltage or current unbalance is above limit.
32-39 User Input Alarm 1
…8
Active when the related user defined function is active.
40-43 Button 1
…4 Simulation
Active when related pushbutton is pressed.
44-45 Input 1
…2 Simulation
Active if signal received from related input.
20.5. OUTPUT CONFIGURATION