DataExpert ATX431, Руководство пользователя

Страница: 8 / 48

Chapter 1: Introduction
CHAPTER 1
INTRODUCTION
Attention:
For new CPU installation, please press the “Home” key to clear the previous
setting to return to Default Setting. To configure your CPU, choose the SMART
SOFT Setting from the BIOS Setup Screen. You can then set the CPU frequency
or others.
IMPORTANT NOTICE
After you have assembled the motherboard with its system configuration
installed, check that all the cables attached are correctly connected as
required before powering on the system. The first procedure you are
required to do is to press the “DEL” key on the keyboard during displaying
memory counting and access the “System BIOS Setup”. Select the “SMART
SOFT CPU Setting” to configure the CPU speed according to the CPU
installed.
SMART SOFT provides you with CPU Auto-Voltage Detection, CPU ID type
and Soft frequency setting on the BIOS “SMART SOFT CPU Setting” option.
You need only to setup the CPU speed type on the BIOS according to the CPU
installed. In the case of wrong or over-rating setting of the CPU Frequency
which exceeds your CPU speed limit, it may render the system failure to
bootup, or no display at all. SMART SOFT provides you with the “Return to
Default setting” for minimal CPU setting.
Press the “HOME” key on the keyboard simultaneously upon
power-up for the system to return to Default setting.
This action will clear the CMOS memory for the system configuration to
Default value. You can also Hardware Clear CMOS with the jumper
indicated on the motherboard.