DataExpert ATX431 Скачать руководство пользователя страница 29

Страница: 29 / 48

Chapter 3: System BIOS Setup

This option configures the keyboard. The settings are

Present

Absent.

If you select

Absent,

AMIBIOS does not report keyboard errors. The Optimal and Fail-Safe default

settings are

Present.

Primary Display

This option configures the primary display subsystem in the computer. The settings
are

Absent, Mono (monochrome), 40CGA, 80CGA,

VGA/EGA.

The Optimal and

Fail-Safe default settings are

VGA/EGA.

Password Check

This option specifies the type of AMIBIOS password protection that is implemented.
The Optimal and Fail-Safe default settings are

Setup.

The settings are:

Setting

Description

Setup

The password prompt appears only when an end user attempts to run AMIBIOS
Setup.

Always

A password prompt appears every time the computer is powered on or rebooted.

The AMIBIOS password does not have to be enabled. The end user sets the password
by choosing the Password icon on the AMIBIOS Setup screen.

Boot to OS/2

Set this option to

Yes

to permit AMIBIOS to run properly if OS/2 or any other

operating system that does not support Plug and Play is to be run on this computer. If
running OS/2 in a computer with 64 MB or more of system memory, set this option to

Yes.

The settings are

Yes

No.

The Optimal and Fail-Safe default settings are

No.

Wait for "F1" If Error

AMIBIOS POST runs system diagnostic tests that can generate a message followed
by:

Press <F1> to continue

If this option is set to

Enabled,

AMIBIOS waits for the end user to press <F1> before

continuing. If this option is set to

Disabled,

AMIBIOS continues the boot process

without waiting for <F1> to be pressed. The settings are

Enabled

Disabled.

The

Optimal default and Fail-Safe default settings are

Enabled.

Содержание ATX431

















































Результаты поиска

Содержание ATX431

Отзывы:

DataExpert ATX431, Руководство пользователя, Страница: 29 / 48

Результаты поиска

Содержание ATX431

Отзывы: