DataExpert ATX431, Руководство пользователя

Страница: 20 / 48

Chapter 2: Installation
2. Press the memory module firmly into place starting from a 45 degree angle making
sure that all the contacts are aligned with the socket.
3. With you finger tips, rock the memory module into a vertical position so that it clicks
into place.
4. The plastic guides should go through the two “Mounting Holes” on the sides and the
“Metal Clips” should snap on the other side.
5. To release the memory module, squeeze both “Metal Clips” outwards and rock the
module out of the “Metal Clips”.
DIMM Memory Installation
Insert the module(s) as shown. Because the number of pins are different on either side of
the breaks. The module will only fit in the orientation as shown. SIMM modules have the
same pin contact on both sides. DIMM modules are longer and have different pin contact
on each side and therefore have a higher pin density.
The notch on the DIMM module will shift between left, center, or right to identify the type
and also to prevent the wrong type of DIMM to be inserted into the DIMM socket on the
motherboard. Four clock signals are supported on this motherboard. You must ask your
retailer for the specifications before purchasing memory modules.
2.3 Installing CPU with SMART SOFT Feature
The ATX431 motherboard provides the jumperless setting for Auto-detection of CPU
voltage, CPU ID and BIOS soft-configure CPU frequency. After you install the CPU
to the
ATX431 motherboard properly, you can operate the CPU without setting the