DataExpert ATX431 Скачать руководство пользователя страница 43

Страница: 43 / 48

Chapter 3: System BIOS Setup

bidirectional communication.

The Optimal and Fail-Safe default settings are

Normal.

EPP Version

This option is only valid if the

Parallel Port Mode

option is set to

EPP.

This option

specifies the version of the Enhanced Parallel Port specification that will be used by
AMIBIOS. The settings are

1.7

1.9.

The Optimal and Fail-Safe default settings are

N/A.

Parallel Port IRQ

This option is only valid if the

Onboard Parallel Port

option is not set to

Disabled.

This option sets the IRQ used by the parallel port. The settings are

5, 7,

Auto

(AMIBIOS automatically sets the correct parallel port IRQ).

The Optimal and Fail-

Safe default settings are

Auto.

Parallel Port DMA Channel

This option is only available if the setting of the

Parallel Port Mode

option is

ECP.

This option sets the DMA channel used by the ECP-capable parallel port. The settings
are

None, 0 (DMA Channel 0), 1 (DMA Channel 1),

3 (DMA Channel 3).

The

Optimal and Fail-Safe default settings are 3

Onboard IDE

This option specifies the channel used by the IDE controller on the motherboard. The
settings are

Disabled, Primary, Secondary,

Both.

The Optimal and Fail-Safe default

settings are

Primary.

For Fast Configuration

Optimal Defaults (Default setting)

The Optimal default values provide optimum performance settings for all devices and
system features.

Fail-Safe Defaults

Содержание ATX431

















































Результаты поиска

Содержание ATX431

Отзывы:

Похожие инструкции для ATX431

Бренды по названию

Популярные бренды

DataExpert ATX431, Руководство пользователя

Результаты поиска

Содержание ATX431

Отзывы:

Похожие инструкции для ATX431

Бренды по названию

Популярные бренды