Datacom DM991C страница 67 Скачать руководство пользователя | Manualshive

Страница: 67 / 89

background image

Product Manual - DM991 Series V Family - 204.4092.08

67

14.

FIRMWARE DOWNLOAD

Equipments go through constant upgrades, in which new facilitators are installed. To use them, it is
necessary that the equipment firmware is modified. This is done by downloading a new firmware.

To download, the user must have available in his/hers computer the file with the new firmware (which can
be obtained on the DATACOM web site:

www.datacom.ind.br

After obtaining file, the user can download it into the equipment through the terminal, sending the file in a
binary form.

Normally, the Windows® HyperTerminal does not send files in a binary form, but in text form. Therefore it
is recommended not to use the Windows® terminal to download software. DATACOM recommends the
use of the TeraTerm, which is a freeware software and can be found in the following address:

www.vector.co.jp/authors/VA002416/teraterm.html

To  update  the  firmware,  log  on  to  the  terminal  and  choose  the  equipment  to  which  the  firmware  will  be
sent. On the main menu screen press “F”. At the bottom of the screen, a message will show up, indicating
the  download  status.  To  start  sending,  the  user  must  wait  until  a  message  appears  indicating  that  the
download  can  be  started.  When  this  message  appears,  click  on  “File  –  Send  File...”.  Now  select  the
firmware, marking the “binary” option on the lower left corner of the screen. After that, click on “Open” and
wait for the download to finish. (Around 5 minutes at 9600bits/s)

The  download  happens  with  normal  modem  operation.  When  the  transference  is  concluded,  the
equipment  will  check  the  integrity  of  the  received  file.  Should  it  be  a  valid  file,  the  equipment  will
automatically  update  your  firmware,  and  only  then  will  it  restart,  interrupting  the  connection  for  about  a
minute and a half.

This feature is included as of the following FW versions:

•

DM991S 4W: 0241-03 - 19/06/06 - 18:27

•

DM991C 4W: 0229-03 - 19/06/06 - 18:44

•

In other models, all versions have this feature.

To download firmware versions that do not have this feature, contact DATACOM's technical support.

The file has an “.im” extension.

«
...
65
66
67
68
69
...
»

Содержание DM991C


























































































Отзывы:

Нет отзывов

Похожие инструкции для DM991C

Бренд: D-Link Страницы: 123

Бренд: D-Link Страницы: 6

Mtx MTX-STARENERGY-M

Бренд: Flexitron Страницы: 41

Бренд: Westermo Страницы: 21

Бренд: D-Link Страницы: 42

Бренд: D-Link Страницы: 64

Бренд: D-Link Страницы: 42

Бренд: D-Link Страницы: 19

Бренд: D-Link Страницы: 66

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 99

Бренд: D-Link Страницы: 84

Бренд: D-Link Страницы: 12

Бренд: D-Link Страницы: 154

Бренд: D-Link Страницы: 57

Бренд: D-Link Страницы: 63

Бренд: D-Link Страницы: 69

Бренд: D-Link Страницы: 66

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды