Ahiba IR Pro User's Guide
Index
•
19
Beaker Dosing
The Ahiba IR Pro can be ordered with custom beaker lids that allow you to inject
liquid or powder chemicals into the beakers during the dyeing process.
Dosing is
done using a self-refilling, manual dosing syringe, or a pre-filled dosing capsule
mounted on the lid, an optional accessory available with the unit.
All dosing beakers are fitted with a patented dosing protector that diffuses the
flow of the liquor onto the substrate. This prevents the chemical from coming into
direct contact with the substrate.
Below are drawings of the installation of the manual dosing protector:
INFORMATION
When dosing a beaker, the liquid chemical being dosed should not come into
direct contact with the substrate. All dosing beakers are fitted with a dosing
protector, which diffuses the flow of the liquor onto the substrate. This prevents
the substrate from being directly contacted with the chemical.
Thoroughly rinse the injection nipples with warm water after each use. This
cleans the working parts, extends the life of the seals and prevents clogging due
to dried chemicals.
Self-Refilling Dosing Syringe
A self-refilling dosing syringe can be used with Ahiba IR Pro.
See also Appendix,
Accessories, Dosing Syringe Accessories for details on replacement parts.
Injection Point
Dosing Protector
Material
Injection Point
