Datacolor 45, Руководство пользователя

Страница: 73 / 79

Datacolor 45 User Guide, 10.2013, Version. 1.0
70
Maintenance
The certificate of performance supplied with this instrument is valid for 1 year when used in an environment suitable for this
type of instruments and when it’s handled and used with care. As the environmental conditions have an effect on the
measurements, Datacolor strongly recommends to have this Instrument regularly (preferably once a year) serviced by
an authorized service engineer.
Maintenance & Certification Services, matching everyone’s needs are available from Datacolor…
please contact your local Datacolor office for more information.
About Instrument Maintenance
The sections that follow provide detailed instructions for maintaining the instrument and calibration tiles.
These instructions and tips will help to insure that the instrument continues to perform properly over its
Life
.
CAUTION
There
are no user-serviceable parts for this equipment.
Instrument
Cleaning
The measurement port should be examined visually for the presence of dust, sample particles, fibers,
and excessive yellowing due to environmental influences. This inspection should be performed
frequently, especially if you measure loose materials.
If you discover loose materials in the sphere, they should be removed.
Tile
Handling and Cleaning
Handling Tiles

Handle calibration tiles with extreme care . Do not drop them, or scratch the glazed surface.

Always grasp the tile using its edges.
Cleaning Tiles

The calibration tiles should be cleaned before each use. Wipe each tile clean with a soft,
lint-free cloth.

A detergent, free of optical brighteners, fluorescent materials or photoactive dyes should be
used as needed to clear any oils, fingerprints, or other deposits. Liquid dish detergent is a
suitable detergent. The detergent/water solution should be prepared as follows:
1 part detergent: 250 parts water

Use a few drops of the detergent solution to moisten a soft, lint-free cloth, and gently wipe
the tile surface. Rinse the detergent from the tile by wiping it with a cloth, moistened with
clean water.

NEVER use abrasive cleansers, razor blades, or other metal objects to remove dirt or
foreign substances from the calibration tiles. This will damage the tile surface.