DataCard magna, Руководство пользователя

Страница: 29 / 180

Using the printer
2-11
User’s Guide for Magna™ Platinum Series™ Printers
7 Verify that the cartridge is replaced correctly by making sure the locating posts
come through the locating holes in the cartridge (
Figure 2-12 ).
If needed, release the cartridge lock and seat the cartridge completely. Press
the cartridge lock again.
If you use an adjustable overlay cartridge, follow the steps provided with the
cartridge to produce a patch placement that meets specifications.
8 Close the top cover.
If the printer has a locking cover, lock the cover after closing it.
♦
Verifying the debower position
The debower in the optional topcoat or overlay module should be set for the type of
cards you print. The debower assures that the heat used to apply the topcoat or
laminate does not leave cards bowed or curled.
Set the debower
Do not use the debower in the On position with proximity cards or smart cards.
Make sure power to the printer is off.
If the printer has a locking cover, unlock the cover before opening it.
1 Lift the top cover.
The overlay or topcoat module is HOT to the touch and remains HOT for up to
30 minutes after the printer is powered off.
2 Pull out the handle for the debower and move it to the desired position for the card
type.
Figure 2-13 shows the on and off positions for the debower.
If you use a topcoat or overlay module, you must use cards that are at least
0.030 inch or 0.760 mm thick.
E
E
E
Card or module type Debower position
0.030 inch (0.76 mm) card on
0.050 (1.27 mm) cards off
Smart card off
Proximity card off
Topcoat module off
!
E
E
!
!
E