![background image](http://html.mh-extra.com/html/datacard/ce870/ce870_user-manual_511425051.webp)
CE870 Instant Issuance System User’s Guide
39
Load Cards in the Input Hopper
Cards can stick together. Slide or fan the cards to separate the edges before placing them in
the input hopper. Handle cards by their edges only, or wear gloves.
Insert ISO magnetic stripe cards with the stripe (back side) facing down and to the right.
Insert smart cards with the smart card chip facing up and toward the back of the hopper.
Single Hopper System
1.
Unlock the printer and open the hopper.
2.
Load the cards into the input hopper. The input hopper
can hold up to 100 cards.
3.
Close the input hopper and lock the printer when you
finish loading cards.
Multi-Hopper System
1.
Unlock the printer and open the multi-
hopper.
2.
Load the cards into the hoppers.
The input hoppers are labeled H1 through
H6. Each input hopper can hold up to 100
cards.
3.
Close the multi-hopper and lock the printer
when you finish loading cards.
A diagram inside the input hopper shows the correct orientation for each type of card.
Содержание CE870
Страница 1: ...Datacard CE870 Instant Issuance System User s Guide January 2017 Part No 527260 001 Rev H ...
Страница 8: ...viii ...
Страница 14: ...2 Introduction ...
Страница 26: ...14 About the System ...