DataCard CE840 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 130

background image

iv

Regulatory Compliance

EMC Compliance Notice

To ensure compliance of the model RX10 retransfer printer to the radiated emissions
requirements for class “A” Information Technology Equipment, be sure to use a shielded Ethernet
cable when connecting to your network

Notice for USA (FCC Notice)

This equipment has been tested and found to comply with the limits for Class A computing
devices, pursuant to Part 15 of FCC rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy. If this
equipment is not installed and used in accordance with this instruction manual, it may cause
harmful interference to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required to correct the
interference at their own expense. Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.

Notice for Canada

Industry Canada

This digital apparatus does not exceed the Class A limits for radio noise for digital apparatus set
out in the Radio Interference Regulations of the Canadian Department of Communications.

Le présent appareil numérique n'émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le brouillage
radioélectrique édicté par le ministère des Communications du Canada.

RSS-Gen, Issue 3, December 2010, Section 7.1.3 User Manual Notice

This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject
to the following two conditions: 1) this device may not cause interference, and 2) this device
must accept any interference, including interference that may cause undesired operation of the
device.

Cet appareil est conforme avec Industrie Canada RSS standard exemptes de licence(s). Son
fonctionnement est soumis aux deux conditions suivantes: 1) ce dispositif ne peut causer des
interférences, et 2) cet appareil doit accepter toute interférence, y compris les interférences qui
peuvent causer un mauvais fonctionnement du dispositif.

«
...
2
3
4
5
6
...
»

Содержание CE840



































































































































Отзывы:

Нет отзывов

Похожие инструкции для CE840

Бренд: Oki Страницы: 2

Бренд: Oki Страницы: 52

Бренд: Oki Страницы: 117

Бренд: Oki Страницы: 45

Бренд: Oki Страницы: 112

Бренд: Oki Страницы: 115

Бренд: Oki Страницы: 2

Бренд: Xerox Страницы: 414

Magicolor 2 plus

Бренд: QMS Страницы: 90

Magicolor 2 Desklaser

Бренд: QMS Страницы: 4

Бренд: QMS Страницы: 8

Бренд: QMS Страницы: 94

Бренд: QMS Страницы: 6

Бренд: Canon Страницы: 4

Бренд: Konica Minolta Страницы: 61

Бренд: Microplex Страницы: 135

Бренд: Xerox Страницы: 24

Бренд: Oki Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды