DataCard CE840, Инструкция по установке и руководство администратора

Страница: 112 / 130

100 Printer Manager

Test Pattern to use for Color and/or Monochrome—Select the type of test pattern to use on
the front or back of the test card. You can select from the following:

TestPattern1—Use this test to evaluate the overall print quality of the card. The color test
prints a full-color test card using the YMCK panels of the print ribbon. The monochrome
test card prints several lines of text.

TestPattern2—Use this test to evaluate the overall print quality when using short-panel
color print ribbon. The monochrome test card prints several lines of text.

TestPattern3—Use this test to identify print intensity issues that can appear as wrinkles
on the printed card. The color test prints a dense blue color card to test the density of the
printed card. The monochrome test card prints a calibration grid.

TestPattern4—Use this test to print a color-step test card that uses all panels of the print
ribbon and displays the steps of each color from darkest to lightest. The monochrome
test card prints a calibration grid.

TestPattern5—Use this test to set up the card registration of the printer. Print the card to
verify changes to the card registration settings. The monochrome test card prints a
calibration grid.

TestPattern6—Use this test to print a marbles-image color test card to evaluate general
appearance. The monochrome test card prints several lines of text.

TestPatternRegistration and TestPatternCheckered—Use these tests to check card
registration mechanically. Side/side or lead/trailing issues may indicate a chassis, card
guide, or roller problem. The monochrome test card prints several lines of text.

TestPatternShort—Use this test to print a short-panel ymcKT test card. The monochrome
test card prints text on the card.

TestPatternGrid—Use this test to print a full K panel test card.

TestPatternPaleBlue—Use this test to identify print intensity issues that can appear as
wrinkles on the printed card. This option prints a lighter blue color card than
TestPattern3. The monochrome test card prints several lines of Katakana text on the card.

TestPatternManufacture A–E—These test cards are used only during manufacturing
setup.

Copies—Enter the number of test cards to print for each test, from 1 to 10.

Park Smart Card—Select this option to park the test card in the smart card bay. The test does
not transmit any data, but is used to test the movement of the card into, and out of, the bay.

Smart Card Park Time—Enter the amount of time to hold the test card in the smart card bay,
from 0 to 300 seconds.

Do not eject card—Select this option to prevent the test card from being ejected from the
printer.