DataCard CE840, Инструкция по установке и руководство администратора

Страница: 105 / 130

CE870 Instant Issuance System Installation and Administrator’s Guide 93

MS2CustomCharLow1—Specify the numeric value of the lowest ASCII character supported
for input data on the track.

MS2CustomCharMask1—Specify the mask value that is subtracted from the ASCII numeric
value to get the encoded value.

MS2CustomCharMax1—Specify the maximum number of data characters for the track. The
value does not include the Start or End Sentinels.

MS2CustomDensity1—Specify the number of data bits per inch of magnetic stripe media for
the track, also called bits per inch or bpi. Allowed values are 75 bpi or 210 bpi.

MS2CustomEndSentinel1—Specify the last character encoded, which identifies the end of
encoded data for the track.

MS2CustomLrc1—Specify a cumulative parity bit that is encoded after the end sentinel to
provide simple error checking.

MS2CustomParity1—Specify a character-level parity bit encoded after each character to
provide simple error checking.

MS2CustomSdsNulls1—The number of nulls between each copy of the data record. You
should not change this value.

MS2CustomSdsRecords1—The number of times to encode the data record. You should not
change this value.

MS2CustomSdsSs1—The number of start sentinels before each data record. You should not
change this value.

MS2CustomStartSentinel1—Specify the first character encoded, which identifies the start of
the encoded data for the track.
Using a custom magnetic stripe data format is a two-step process. First, define the custom track
using MagStripeMS2CustomTrack1. Second, apply the custom track using the settings on the
MagStripeMS2General menu.
1.
To use the defined custom track:
a.
Open the MagStripeMS2General menu.
b.
Select CUSTOM for MS2DataFormat1 to use the custom track.
2.
Click Set Current to apply the changes.