Chapter 7
58
9.
From the Scope view, double-click the input range of the channel
to change the input range of the module (±2.5 V, ±1.25 V,
±0.625 V, ±0.3125 V, ±0.15625 V, ±0.078125 V, or ±0.0390625 V for
bipolar ranges, 0 to 2.5 V, 1.25 V, 0.625 V, 0.3125 V, 0.15625 V,
0.078125 V, or 0.0390625 V for unipolar ranges, or
−
0.1 to 2.5 V,
1.25 V, 0.625 V, 0.3125 V, 0.15625 V, 0.078125 V, or 0.0390625 V for
offset unipolar ranges).
The display changes to reflect the selected range for all the analog input
channels on the module.
10.
In the Trigger box, select Auto to acquire data continuously from
the specified channels or Manual to acquire a burst of data from
the specified channels.
11.
Click Start from the Toolbar to start the continuous analog input
operation.
The values acquired from each channel are displayed in a unique color
on the oscilloscope view.
Note:
When the module is performing a continuous Scope or
FFT operation, the LED on the module turns green (the resulting
color may appear yellow).
12.
Click Stop from the Toolbar to stop the operation.
