Chapter 4
24
8.
If you want to rename the function module, click Edit Name;
otherwise, go to step 10.
9.
Enter a new name for the function module, then click OK.
Note:
This name is used to identify the module in all subsequent
applications.
10.
When you are finished configuring the function module, click
Close
.
11.
Repeat steps 3 to 10 for the other function modules that you want
to configure.
12.
Close the Control Panel.
Note:
By default, the 100 Hz input filters are turned off. Use your
software application program to turn them on.
