Data Translation DT340, Руководство по началу работы

Страница: 27 / 70

Installing a DT340 Board and Loading the Device Driver
19
3
3
3
3
3
3
3
3
3
Inserting the DT340 Board into the
Computer
Once you have set up an expansion slot and configured the DT340
board, perform the following steps to insert the DT340 board into the
computer:
1. Discharge any static electricity by holding the wrapped board in
one hand while placing your other hand firmly on a metal
portion of the computer chassis.
2. Carefully remove the antistatic packing material from the board.
(It is recommended that you save the original packing material in
the unlikely event that your board requires servicing in the
future.)
3. Hold the board by its edges and do not touch any of the
components on the board.
4. Position the board so that the cable connectors are facing the rear
of the computer, as shown in
Figure 3 .
Figure 3: Inserting the DT340 Board in the Computer
Rear of Computer
DT340 Board
PCI Expansion Slot Bus Connector