Data Translation DT3152-LS, Руководство по началу работы

Страница: 66 / 84

Chapter 5
56
Installing and Configuring the Device
Driver in Windows XP
To install the DT3152-LS Device Driver in Windows XP, you need to
disable the device, then install and configure the device driver as
described in the following sections.
Note: In some machines, the DT315-LS2 may not be detected
automatically when you start Windows XP. If this should occur, skip
the section on disabling the device, and continue with the
instructions on
page 57 .
Disabling the Device
You need to disable the device so that Windows XP does not
reidentify the board every time the system is restarted. To disable the
device, perform the following steps:
1. Start Windows XP (with administrative rights).
The Found New Hardware Wizard dialog box is displayed.
2. Select Install from a list of specific location (Advanced) .
3. Click Next .
4.
Select
Search for the best driver in these locations,
and uncheck
all other options.
5. Click Next .
6. Uncheck all the optional search locations boxes, then click Next .
If the Multimedia Video Controller dialog box appears, proceed to step 7.
Otherwise, the message
Cannot Install this Hardware appears;
proceed to step 8.
7. Select the option No, do not connect to Internet now , then click
Next .