Data Translation DT3152-LS, Руководство по началу работы, Страница: 67 / 84

Installing and Configuring the Device Driver
57
5
5
5
5
5
5
5
5
5
8. Select Don’t prompt me again to install this software , then click
Finish .
The Help and Support Center window appears.
9. Click Cancel , then click Finish .
Installing/Configuring the Device Driver
Once you have disabled the device, install/configure the device
driver by performing the following steps:
1. From the Control Panel, click Add Hardware .
The Add Hardware Wizard appears.
2. Click Next .
A message about hardware connection appears.
3. Select Yes, I have already connected the hardware , then click
Next .
4. Scroll through the list and select Add a new hardware device ,
then click Next .
5. Select Install the hardware that I manually select from a list
(Advanced) , then click Next .
6. Click Sound, video and game controllers , then click Next .
7. Click Have Disk .
8. Insert the Imaging OMNI CD into your CD-ROM drive.
9. Browse to the \Drivers\DT3152LS\Win2K directory on the
Imaging OMNI CD.
10. Select the OEMSETUP.INF file, then click Open .
11. Click OK .
A Software Installation window appears.
12. Click Continue Anyway .
A Digital Signature Not Found dialog box appears .
13. Click Next .